Marschall Labs LogoBack to overview

Reference

Test Methods Reference

A reference list of selected test methods from international standards organizations. Marschall Labs is proficient in a wide array of these and other industry-standard testing procedures.

Showing 329 of 329 methods

ASTM

108 methods
  1. B117Standard Practice for Operating Salt Spray (Fog) Apparatus
  2. D412Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers—Tension
  3. D471Standard Test Method for Rubber Property—Effect of Liquids
  4. D522Standard Test Methods for Mandrel Bend Test of Attached Organic Coatings
  5. D523Standard Test Method for Specular Gloss
  6. D562Standard Test Method for Krebs Unit (KU) Viscosity of Paints
  7. D610Standard Test Method for Evaluating Degree of Rusting on Painted Steel Surfaces
  8. D624Standard Test Method for Tear Strength of Conventional Vulcanized Rubber and Thermoplastic Elastomers
  9. D638Standard Test Method for Tensile Properties of Plastics
  10. D660Standard Test Method for Evaluating Degree of Checking of Exterior Paints
  11. D661Standard Test Method for Evaluating Degree of Cracking of Exterior Paints
  12. D662Standard Test Method for Evaluating Degree of Erosion of Exterior Paints
  13. D695Standard Test Method for Compressive Properties of Rigid Plastics
  14. D714Standard Test Method for Evaluating the Degree of Blistering of Paints
  15. D772Standard Test Method for Evaluating Degree of Flaking (Scaling) of Exterior Paints
  16. D790Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics
  17. D792Standard Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement
  18. D823Standard Practices for Producing Films of Uniform Thickness of Paint, Varnish, and Related Products on Test Panels
  19. D882Standard Test Method for Tensile Properties of Thin Plastic Sheeting
  20. D903Standard Test Method for Peel or Stripping Strength of Adhesive Bonds
  21. D968Standard Test Methods for Abrasion Resistance of Organic Coatings by Falling Abrasive
  22. D1002Test Method for Apparent Shear Strength of Single-Lap-Joint Adhesively Bonded Metal Specimens
  23. D1003Standard Test Method for Haze and Luminous Transmittance of Transparent Plastics
  24. D1004Standard Test Method for Tear Resistance (Graves Tear) of Plastic Film and Sheeting
  25. D1006Standard Practice for Exposure Tests of Paints on Wood
  26. D1084Standard Test Methods for Viscosity of Adhesives
  27. D1210Standard Test Method for Fineness of Dispersion of Pigment-Vehicle Systems by Hegman-Type Gage
  28. D1212Standard Test Methods for Measurement of Wet Film Thickness of Organic Coatings
  29. D1308Standard Test Method for Effect of Household Chemicals on Clear and Pigmented Organic Finishes
  30. D1329Standard Test Method for Evaluating Rubber Property—Retraction at Lower Temperatures (TR Test)
  31. D1439Standard Test Methods for Sodium Carboxymethylcellulose
  32. D1475Standard Test Method for Density of Liquid Coatings, Inks, and Related Products
  33. D1640Standard Test Methods for Drying, Curing, or Film Formation of Organic Coatings at Room Temperature
  34. D1653Standard Test Methods for Water Vapor Transmission of Organic Coating Films
  35. D1654Standard Test Method for Evaluation of Painted or Coated Specimens Subjected to Corrosive Environments
  36. D1729Standard Practice for Visual Appraisal of Colors and Color Differences of Diffusely-Illuminated Opaque Materials
  37. D1735Standard Practice for Testing Water Resistance of Coatings Using Water Fog Apparatus
  38. D1849Standard Test Method for Package Stability of Paint
  39. D1876Standard Test Method for Peel Resistance of Adhesives (T-Peel Test)
  40. D2196Standard Test Methods for Rheological Properties of Non-Newtonian Materials by Rotational Viscometer
  41. D2197Standard Test Method for Adhesion of Organic Coatings by Scrape Adhesion
  42. D2243Standard Test Method for Freeze-Thaw Resistance of Water-Borne Coatings
  43. D2244Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
  44. D2246Test Method for Freeze-Thaw Resistance of Water-Borne Coatings
  45. D2247Standard Practice for Testing Water Resistance of Coatings in 100% Relative Humidity
  46. D2369Standard Test Method for Volatile Content of Coatings
  47. D2457Standard Test Method for Specular Gloss of Plastic Films and Solid Plastics
  48. D2486Standard Test Methods for Scrub Resistance of Interior Paints
  49. D2794Standard Test Method for Resistance of Organic Coatings to the Effects of Rapid Deformation (Impact)
  50. D2805Standard Test Method for Hiding Power of Paints by Reflectometry
  51. D3045Standard Practice for Heat Aging of Plastics Without Load
  52. D3273Standard Test Method for Resistance to Growth of Mold on the Surface of Interior Coatings in an Environmental Chamber
  53. D3274Standard Test Method for Evaluating Degree of Surface Disfigurement of Paint Films by Microbial (Fungal or Algal) Growth or Soil and Dirt Accumulation
  54. D3330Standard Test Method for Peel Adhesion of Pressure-Sensitive Tape
  55. D3359Standard Test Methods for Measuring Adhesion by Tape Test
  56. D3363Standard Test Method for Film Hardness by Pencil Test
  57. D3389Standard Test Method for Coated Fabrics Abrasion Resistance (Rotary Platform Abrader)
  58. D3884Standard Guide for Abrasion Resistance of Textile Fabrics (Rotary Platform, Double-Head Method)
  59. D3925Standard Practice for Sampling Liquid Paints and Related Pigmented Coatings
  60. D3960Standard Practice for Determining Volatile Organic Compound (VOC) Content of Paints and Related Coatings
  61. D3980Standard Practice for Interlaboratory Testing of Paint and Related Materials
  62. D4017Standard Test Method for Water in Paints and Paint Materials by Karl Fischer Method
  63. D4060Standard Test Method for Abrasion Resistance of Organic Coatings by the Taber Abraser
  64. D4062Standard Test Method for Leveling of Paints by Draw-Down Method
  65. D4212Standard Test Method for Viscosity by Dip-Type Viscosity Cups
  66. D4213Standard Test Method for Wet Abrasion Resistance of Interior Paints
  67. D4214Standard Test Methods for Evaluating the Degree of Chalking of Exterior Paint Films
  68. D4287Standard Test Method for High-Shear Viscosity Using a Cone/Plate Viscometer
  69. D4366Standard Test Methods for Hardness of Organic Coatings by Pendulum Damping Tests
  70. D4400Standard Test Method for Sag Resistance of Paints Using a Multinotch Applicator
  71. D4541Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers
  72. D4585Standard Practice for Testing Water Resistance of Coatings Using Controlled Condensation
  73. D4587Standard Practice for Fluorescent UV-Condensation Exposures of Paint and Related Coatings
  74. D4703Standard Practice for Compression Molding Thermoplastic Materials into Test Specimens, Plaques, and Sheets
  75. D4752 or D5402Solvent Resistance / Rub Test
  76. D4828Standard Test Methods for Practical Washability of Interior Architectural Coatings
  77. D4946Standard Test Method for Blocking Resistance of Architectural Paints
  78. D4958Standard Test Method for Comparison of the Brush Drag of Latex Paints
  79. D5150Standard Test Method for Hiding Power of Architectural Paints to a Putty Line
  80. D5870Standard Practice for Calculating Property Retention Index of Plastics
  81. D5894Standard Practice for Cyclic Salt Fog/UV Exposure of Painted Metal
  82. D5895Standard Test Methods for Evaluating Drying or Curing of Organic Coatings Using Mechanical Recorders
  83. D6736Standard Test Method for Burnish Resistance of Latex Paints
  84. D6886Standard Test Method for Speciation of the Volatile Organic Compounds (VOCs) in Low VOC Content Waterborne Air-Dry Coatings by Gas Chromatograph
  85. D6904Standard Practice for Resistance to Wind-Driven Rain of Exterior Coatings Applied on Masonry
  86. D6905Standard Test Method for Impact Flexibility of Organic Coatings
  87. D7027Standard Test Method for Evaluation of Scratch Resistance of Polymeric Coatings and Plastics
  88. D7073Standard Test Method for Tensile Properties of Bituminous Materials
  89. D7232Standard Test Method for Rapid Determination of the Nonvolatile Content of Coatings by Loss in Weight
  90. D7786Standard Practice for Unaccelerated Outdoor Exposure testing of PVC Building Products
  91. E70Standard Test Method for pH of Aqueous Solutions With the Glass Electrode
  92. E96Standard Test Methods for Water Vapor Transmission of Materials
  93. E308Standard Practice for Computing the Colors of Objects by Using the CIE System
  94. E313Standard Practice for Calculating Yellowness and Whiteness Indices from Instrumentally Measured Color Coordinates
  95. E331Standard Test Method for Water Penetration of Exterior Windows, Skylights,Doors, and Curtain Walls by Uniform Static Air Pressure Difference
  96. E691Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
  97. E805Standard Practice for Identification of Instrumental Methods of Color or Color-Difference Measurement of Materials
  98. E1164Standard Practice for Obtaining Spectrometric Data for Object-Color Evaluation
  99. F88Standard Test Method for Seal Strength of Flexible Barrier Materials
  100. F510Standard Test Method for Resistance to Abrasion of Resilient Floor Coverings
  101. F1978Standard Test Method for Measuring Abrasion Resistance of Metallic Thermal Spray Coatings by Using the Taber Abraser
  102. G26Standard Practice for Operating Light-Exposure Apparatus (Xenon-Arc Type) With and Without Water for Exposure of Nonmetallic Materials
  103. G85Standard Practice for Modified Salt Spray (Fog) Testing
  104. G113Standard Terminology Relating to Natural and Artificial Weathering Tests of Nonmetallic Materials
  105. G151Standard Practice for Exposing Nonmetallic Materials in Accelerated Test Devices that Use Laboratory Light Sources
  106. G154Standard Practice for Operating Fluorescent Ultraviolet (UV) Lamp Apparatus
  107. G155Standard Practice for Operating Xenon Arc Light Apparatus for Exposure of Non-Metallic Materials
  108. G177Standard Tables for Reference Solar Ultraviolet Spectral Distributions: Hemispherical on a 37° Tilted Surface

ISO

53 methods
  1. 34-1Rubber, vulcanized or thermoplastic — Determination of tear strength — Part 1: Trouser, angle and crescent test pieces
  2. 37Rubber, vulcanized or thermoplastic — Determination of tensile stress-strain properties
  3. 105-B02, B04, B05, B06Textiles — Tests for colour fastness
  4. 150Raw, refined and boiled linseed oil for paints and varnishes — Specifications and methods of test
  5. 178Plastics — Determination of flexural properties
  6. 188Rubber, vulcanized or thermoplastic — Accelerated ageing and heat-resistance tests
  7. 527-1Plastics — Determination of tensile properties — Part 1: General principles
  8. 527-3Plastics — Determination of tensile properties — Part 3: Test conditions for films and sheets
  9. 604Plastics — Determination of compressive properties
  10. 815-1Rubber, vulcanized or thermoplastic — Determination of compression set — Part 1: At ambient or elevated temperatures
  11. 1183-1Plastics — Methods for determining the density of non-cellular plastics — Part 1: Immersion method, liquid pyknometer method and titration method
  12. 1513Paints and varnishes — Examination and preparation of test samples
  13. 1518-1Paints and varnishes — Determination of scratch resistance — Part 1: Constant-loading method
  14. 1522Paints and varnishes — Pendulum damping test
  15. 2409Paints and varnishes — Cross-cut test
  16. 2431Paints and varnishes — Determination of flow time by use of flow cups
  17. 2555Plastics — Resins in the liquid state or as emulsions or dispersions — Determination of apparent viscosity using a single cylinder type rotational viscometer
  18. 2811-1Paints and varnishes — Determination of density — Part 1: Pycnometer method
  19. 2813Paints and varnishes — Determination of gloss value at 20°, 60° and 85°
  20. 2884-1Paints and varnishes — Determination of viscosity using rotary viscometers — Part 1: Cone-and-plate viscometer operated at a high rate of shear
  21. 3219Plastics — Polymers/resins in the liquid state or as emulsions or dispersions — Determination of viscosity using a rotational viscometer with defined shear rate
  22. 4587Adhesives — Determination of tensile lap-shear strength of rigid-to-rigid bonded assemblies
  23. 4624Paints and varnishes — Pull-off test for adhesion
  24. 4628-2Paints and varnishes — Evaluation of degradation of coatings — Part 2: Assessment of degree of blistering
  25. 4628-3Paints and varnishes — Evaluation of degradation of coatings — Part 3: Assessment of degree of rusting
  26. 4628-4Paints and varnishes — Evaluation of degradation of coatings — Part 4: Assessment of degree of cracking
  27. 4628-5Paints and varnishes — Evaluation of degradation of coatings — Part 5: Assessment of degree of flaking
  28. 4628-6Paints and varnishes — Evaluation of degradation of coatings — Part 6: Assessment of a degree of chalking by tape method
  29. 4892-1Plastics — Methods of exposure to laboratory light sources — Part 1: General guidance
  30. 4892-2Plastics — Methods of exposure to laboratory light sources — Part 2: Xenon-arc lamps
  31. 4892-3Plastics — Methods of exposure to laboratory light sources — Part 3: Fluorescent UV lamps
  32. 6270-2Paints and varnishes — Determination of resistance to humidity — Part 2: Procedure for exposing test specimens in condensation-water atmospheres
  33. 6272-1Paints and varnishes — Rapid-deformation (impact resistance) tests — Part 1: Falling-weight test, large-area indenter
  34. 7619-1Rubber, vulcanized or thermoplastic — Determination of indentation hardness — Part 1: Durometer method (Shore hardness)
  35. 7784-2Paints and varnishes — Determination of resistance to abrasion — Part 2: Method with abrasive wheels and rotating test specimen
  36. 8295Plastics — Film and sheeting — Determination of the coefficients of friction
  37. 8501-1Preparation of steel substrates before application of paints and related products — Visual assessment of surface cleanliness — Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings
  38. 8502-3Preparation of steel substrates before application of paints... Part 3: Assessment of dust on steel surfaces prepared for painting (pressure-sensitive tape method)
  39. 9117-4Paints and varnishes — Drying tests — Part 4: Test using a mechanical recorder
  40. 9227Corrosion tests in artificial atmospheres — Salt spray tests
  41. 9352Plastics — Determination of resistance to wear by abrasive wheels
  42. 11341Paints and varnishes — Artificial weathering and exposure to artificial radiation — Exposure to filtered xenon-arc radiation
  43. 11507Paints and varnishes — Exposure of coatings to artificial weathering — Exposure to fluorescent UV lamps and water
  44. 11890-1Paints and varnishes — Determination of volatile organic compound (VOC) content — Part 1: Difference method
  45. 11997-2Paints and varnishes — Determination of resistance to cyclic corrosion conditions — Part 2: Wet (salt fog)/dry/humidity/UV light
  46. 11998Paints and varnishes — Determination of wet-scrub resistance and cleanability of coatings
  47. 12944-1Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 1: General introduction
  48. 15528Paints, varnishes and raw materials for paints and varnishes — Sampling
  49. 16151Corrosion of metals and alloys — Accelerated cyclic tests with exposure to salt fog, ""dry"" and ""wet"" conditions
  50. 16474-3Paints and varnishes — Methods of exposure to laboratory light sources — Part 3: Fluorescent UV lamps
  51. 20567-1Paints and varnishes — Determination of stone-chip resistance of coatings — Part 1: Multi-impact testing
  52. 21227-2Paints and varnishes — Determination of scratch resistance by a cross-cutting method
  53. 22088-3Plastics — Determination of resistance to environmental stress cracking (ESC) — Part 3: Bent strip method

DIN

33 methods
  1. 50017Climates and their technical application - Condensation water test climates
  2. 50018Testing in a saturated atmosphere in the presence of sulfur dioxide
  3. 53109Testing of paper and board; determination of abrasion resistance by the abrasive wheel method
  4. 53211Viscometry - Determination of the flow time by use of the DIN flow cup
  5. 67530Reflectometer as a means for gloss assessment of plane surfaces of paint coatings and plastics
  6. EN 13523-21Coil coated metals - Test methods - Part 21: Evaluation of outdoor exposed panels
  7. EN ISO 178Plastics - Determination of flexural properties
  8. EN ISO 527-1Plastics - Determination of tensile properties - Part 1: General principles
  9. EN ISO 604Plastics - Determination of compressive properties
  10. EN ISO 1518-1Paints and varnishes - Determination of scratch resistance - Part 1: Constant-loading method
  11. EN ISO 1522Paints and varnishes - Pendulum damping test
  12. EN ISO 2409Paints and varnishes - Cross-cut test
  13. EN ISO 2555Plastics - Resins in the liquid state or as emulsions or dispersions - Determination of apparent viscosity using a single cylinder type rotational viscometer
  14. EN ISO 2811-1Paints and varnishes - Determination of density - Part 1: Pycnometer method
  15. EN ISO 2813Paints and varnishes - Determination of gloss value at 20°, 60° and 85°
  16. EN ISO 2884-1Paints and varnishes - Determination of viscosity using rotary viscometers - Part 1: Cone-and-plate viscometer operated at a high rate of shear
  17. EN ISO 4624Paints and varnishes - Pull-off test for adhesion
  18. EN ISO 4628-1Paints and varnishes - Evaluation of degradation of coatings... Part 1: General introduction and designation system
  19. EN ISO 4628-2Paints and varnishes - ... Part 2: Assessment of degree of blistering
  20. EN ISO 4628-3Paints and varnishes - ... Part 3: Assessment of degree of rusting
  21. EN ISO 4628-4Paints and varnishes - ... Part 4: Assessment of degree of cracking
  22. EN ISO 4628-5Paints and varnishes - ... Part 5: Assessment of degree of flaking
  23. EN ISO 4628-6Paints and varnishes - ... Part 6: Assessment of degree of chalking by tape method
  24. EN ISO 4892-3Plastics - Methods of exposure to laboratory light sources - Part 3: Fluorescent UV lamps
  25. EN ISO 6270-2Paints and varnishes - Determination of resistance to humidity - Part 2: Condensation-water atmospheres
  26. EN ISO 7784-2Paints and varnishes - Determination of resistance to abrasion - Part 2: Method with abrasive wheels and rotating test specimen
  27. EN ISO 9117-4Paints and varnishes - Drying tests - Part 4: Test using a mechanical recorder
  28. EN ISO 9227Corrosion tests in artificial atmospheres - Salt spray tests
  29. EN ISO 11507Paints and varnishes - Exposure of coatings to artificial weathering - Exposure to fluorescent UV lamps and water
  30. EN ISO 11997-2Paints and varnishes - Determination of resistance to cyclic corrosion conditions - Part 2: Wet (salt fog)/dry/humidity/UV light
  31. EN ISO 11998Paints and varnishes - Determination of wet-scrub resistance and cleanability of coatings
  32. ISO 37Rubber, vulcanized or thermoplastic - Determination of tensile stress-strain properties
  33. ISO 188Rubber, vulcanized or thermoplastic - Accelerated ageing and heat-resistance tests

SAE

19 methods
  1. J361Procedure for Visual Evaluation of Interior and Exterior Automotive Trim
  2. J365Method for Testing Resistance to Abrasion of Automotive Bodycloth, Vinyl, and Leather
  3. J400Test for Chip Resistance of Surface Coatings
  4. J861Method of Testing Resistance to Crocking of Organic Trim Materials
  5. J883Test Method for Determining Dimensional Stability of Automotive Textile Materials
  6. J948Test Method for Determining Resistance to Scuffing of Trim Materials
  7. J1530Test Method for Determining Resistance to Abrasion, Bearding, and Fiber Loss of Automotive Carpet Materials
  8. J1545Instrumental Color Difference Measurement for Exterior Finishes, Textiles, and Trim
  9. J1749Standard for Determining the Resistance of Transparent Plastics to Abrasion
  10. J1885Accelerated Exposure of Automotive Interior Trim Components Using a Controlled Irradiance Xenon-Arc Apparatus
  11. J1958Test Method for Adhesion of Automotive Weatherstrip to Body and Glass
  12. J1960Accelerated Exposure of Automotive Exterior Materials Using a Controlled Irradiance Xenon-Arc Apparatus
  13. J2020Accelerated Exposure of Automotive Exterior Materials Using a Fluorescent UV and Condensation Apparatus
  14. J2334Laboratory Cyclic Corrosion Test
  15. J2412Accelerated Exposure of Automotive Interior Trim Components Using a Controlled Irradiance Weathering Apparatus
  16. J2527Performance Based Standard for Accelerated Exposure of Automotive Exterior Materials Using a Controlled Irradiance Xenon-Arc Apparatus
  17. J2721Recommended Practice for Salt Spray Testing of Fasteners
  18. J3205Test Method for Scratch and Mar Resistance of Coatings by Impacting with a Conical Stylus
  19. J322Test Method for Measuring Resistance to Cracking of Automotive Lacquers

MIL

18 methods
  1. MIL-DTL-24441Paint, Epoxy-Polyamide, General Purpose
  2. MIL-DTL-53039Coating, Aliphatic Polyurethane, Single Component, Chemical Agent Resistant
  3. MIL-PRF-22750Coating, Epoxy, High-Solids
  4. MIL-PRF-23236Coating Systems for Ship Structures
  5. MIL-PRF-85285Coating: Polyurethane, Aircraft and Support Equipment
  6. MIL-STD-810, Method 504.3Contamination by Fluids
  7. MIL-STD-810, Method 505.7Solar Radiation (Sunshine)
  8. MIL-STD-810, Method 506.6Rain
  9. MIL-STD-810, Method 507.6Humidity
  10. MIL-STD-810, Method 509.7Salt Fog
  11. MIL-STD-810, Method 512.6Immersion
  12. Various MIL-PRF/DTLAdhesion (Cross-hatch) - per ASTM D3359
  13. Various MIL-PRF/DTLAbrasion Resistance - per ASTM D4060
  14. Various MIL-PRF/DTLHardness (Pencil) - per ASTM D3363
  15. Various MIL-PRF/DTLFlexibility (Mandrel Bend) - per ASTM D522
  16. Various MIL-PRF/DTLSolvent Resistance / Rub Test - per ASTM D4752 or D5402
  17. Various MIL-PRF/DTLViscosity - per ASTM D2196 or D562
  18. Various MIL-PRF/DTLColor Measurement - per ASTM E308 / D2244

AATCC

19 methods
  1. EP1Gray Scale for Color Change
  2. EP2Gray Scale for Staining
  3. EP6Instrumental Color Measurement
  4. EP7Instrumental Assessment of the Change in Color of a Test Specimen
  5. EP9Visual Assessment of Color Difference of Textiles
  6. TM8Colorfastness to Crocking: AATCC Crockmeter Method
  7. TM15Colorfastness to Perspiration
  8. TM16.3Colorfastness to Light: Xenon-Arc
  9. TM101Colorfastness to Bleaching with Hydrogen Peroxide
  10. TM107Colorfastness to Water
  11. TM117Colorfastness to Heat: Dry (Excluding Pressing)
  12. TM135Dimensional Changes of Fabrics after Home Laundering
  13. TM162Colorfastness to Water: Chlorinated Pool
  14. TM172Colorfastness to Non-Chlorine Bleach in Home Laundering
  15. TM173CMC: Calculation of Small Color Differences for Acceptability
  16. TM186Weather Resistance: UV Light and Moisture Exposure
  17. TM188Colorfastness to Sodium Hypochlorite Bleach in Home Laundering
  18. TM190Colorfastness to Home Laundering with Activated Oxygen Bleach
  19. TM200Drying Rate of Textiles at their Absorbent Capacity: Air Flow Method

TAPPI

20 methods
  1. T412Moisture in pulp, paper and paperboard
  2. T432Water absorbency of bibulous papers
  3. T441Water absorptiveness of sized paper and paperboard (Cobb test)
  4. T452Brightness of pulp, paper, and paperboard (directional reflectance at 457 nm)
  5. T459Surface strength of paper (wax pick test)
  6. T476Abrasion resistance of paper and paperboard (Taber-type tester)
  7. T480Specular gloss of paper and paperboard at 75°
  8. T494Tensile properties of paper and paperboard (using constant rate of elongation apparatus)
  9. T524Color of paper and paperboard (L*a*b* in CIE system)
  10. T541Internal bond strength of paperboard (z-direction tensile)
  11. T549Coefficients of static and kinetic friction of uncoated writing and printing paper by use of the horizontal plane method
  12. T556Bending resistance of paper and paperboard (deflection method)
  13. T569Internal bond strength (scott type)
  14. T610Preparation of indicators and standard solutions
  15. T646Brightness of clay and other mineral pigments (45°/0° directionality)
  16. T653Specular gloss of paper and paperboard at 20°
  17. T813Tensile test for the manufacturer's joint of fiberboard shipping containers
  18. T815Coefficient of static friction (slide angle) of packaging and packaging materials
  19. T816Coefficient of static friction of corrugated and solid fiberboard (horizontal plane method)
  20. T821Pin adhesion of corrugated board by selective separation

BS

29 methods
  1. 3900-A19Methods of test for paints. Measurement of density or relative density of paints and related materials (pyknometer method)
  2. EN ISO 178Plastics - Determination of flexural properties
  3. EN ISO 527-1Plastics - Determination of tensile properties - Part 1: General principles
  4. EN ISO 604Plastics - Determination of compressive properties
  5. EN ISO 1518-1Paints and varnishes - Determination of scratch resistance - Part 1: Constant-loading method
  6. EN ISO 1522Paints and varnishes - Pendulum damping test
  7. EN ISO 2409Paints and varnishes - Cross-cut test
  8. EN ISO 2555Plastics - Resins in the liquid state or as emulsions or dispersions - Determination of apparent viscosity using a single cylinder type rotational viscometer
  9. EN ISO 2811-1Paints and varnishes - Determination of density - Part 1: Pycnometer method
  10. EN ISO 2813Paints and varnishes - Determination of gloss value at 20°, 60° and 85°
  11. EN ISO 2884-1Paints and varnishes - Determination of viscosity using rotary viscometers - Part 1: Cone-and-plate viscometer operated at a high rate of shear
  12. EN ISO 4624Paints and varnishes - Pull-off test for adhesion
  13. EN ISO 4628-1Paints and varnishes - Evaluation of degradation of coatings... Part 1: General introduction and designation system
  14. EN ISO 4628-2Paints and varnishes - ... Part 2: Assessment of degree of blistering
  15. EN ISO 4628-3Paints and varnishes - ... Part 3: Assessment of degree of rusting
  16. EN ISO 4628-4Paints and varnishes - ... Part 4: Assessment of degree of cracking
  17. EN ISO 4628-5Paints and varnishes - ... Part 5: Assessment of degree of flaking
  18. EN ISO 4628-6Paints and varnishes - ... Part 6: Assessment of degree of chalking by tape method
  19. EN ISO 4892-3Plastics - Methods of exposure to laboratory light sources - Part 3: Fluorescent UV lamps
  20. EN ISO 6270-2Paints and varnishes - Determination of resistance to humidity - Part 2: Condensation-water atmospheres
  21. EN ISO 7784-2Paints and varnishes - Determination of resistance to abrasion - Part 2: Method with abrasive wheels and rotating test specimen
  22. EN ISO 9117-4Paints and varnishes - Drying tests - Part 4: Test using a mechanical recorder
  23. EN ISO 9227Corrosion tests in artificial atmospheres - Salt spray tests
  24. EN ISO 11507Paints and varnishes - Exposure of coatings to artificial weathering - Exposure to fluorescent UV lamps and water
  25. EN ISO 1183-1Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method...
  26. EN ISO 11997-2Paints and varnishes - Determination of resistance to cyclic corrosion conditions - Part 2: Wet (salt fog)/dry/humidity/UV light
  27. EN ISO 11998Paints and varnishes - Determination of wet-scrub resistance and cleanability of coatings
  28. ISO 37Rubber, vulcanized or thermoplastic - Determination of tensile stress-strain properties
  29. ISO 188Rubber, vulcanized or thermoplastic - Accelerated ageing and heat-resistance tests

JIS

30 methods
  1. D0205Test Method of Weatherability for Automotive Parts
  2. H8502Methods of corrosion resistance test for anodic oxide coatings on aluminium and aluminium alloys
  3. K5600-2-2Testing methods for paints - Part 2-2: Characteristics and stability of paint - Viscosity
  4. K5600-4-5Testing methods for paints - Part 4-5: Visual characteristics of film - Colour (measurement)
  5. K5600-4-7Testing methods for paints - Part 4-7: Visual characteristics of film - Specular gloss
  6. K5600-5-1Testing methods for paints - Part 5-1: Mechanical property of film - Bend test (cylindrical mandrel)
  7. K5600-5-4Testing methods for paints - Part 5-4: Mechanical property of film - Scratch hardness (Pencil method)
  8. K5600-5-5Testing methods for paints - Part 5-5: Mechanical property of film - Scratch hardness (Stylus method)
  9. K5600-5-6Testing methods for paints - Part 5-6: Mechanical property of film - Adhesion test (Cross-cut test)
  10. K5600-5-7Testing methods for paints - Part 5-7: Mechanical property of film - Adhesion test (Pull-off methods)
  11. K5600-5-8Testing methods for paints - Part 5-8: Mechanical property of film - Abrasion resistance (Rotating abrasive-paper-covered wheel method)
  12. K5600-5-9Testing methods for paints - Part 5-9: Mechanical property of film - Abrasion resistance (Rotating abrasive rubber wheel method)
  13. K5600-5-11Testing methods for paints - Part 5-11: Mechanical property of film - Washability
  14. K5600-6-1Testing methods for paints - Part 6-1: Chemical property of film - General rule
  15. K5600-7-7Testing methods for paints - Part 7-7: Long-period performance of film - Accelerated weathering (exposure to filtered xenon-arc radiation)
  16. K5600-7-8Testing methods for paints - Part 7-8: Long-period performance of film - Accelerated weathering (exposure to fluorescent UV lamps)
  17. K5600-8-2Testing methods for paints - Part 8-2: Evaluation of degradation of coatings - Assessment of degree of blistering
  18. K5600-8-4Testing methods for paints - Part 8-4: Evaluation of degradation of coatings - Assessment of degree of cracking
  19. K5600-8-5Testing methods for paints - Part 8-5: Evaluation of degradation of coatings - Assessment of degree of flaking
  20. K6783Testing methods for rubber based adhesives
  21. K6854Adhesives - Determination of peel strength of bonded assemblies
  22. K7105Testing methods for optical properties of plastics
  23. K7111Plastics - Determination of flexural properties
  24. K7127Plastics - Film and sheeting - Determination of tensile properties
  25. K7161Plastics - Determination of tensile properties
  26. K7162Plastics - Determination of tensile properties - Part 2: Test conditions for molding and extrusion plastics
  27. K7373Plastics - Determination of specular gloss
  28. Z2371Methods of salt spray testing
  29. Z8722Methods of colour measurement - Reflecting and transmitting objects
  30. Z8803Methods for viscosity measurement of liquid